Product ID:ETHYLENE/MALEIC ANHYDRIDE COPOLYMER, 197
MSDS Date:01/19/1993
FSC:6810
NIIN:00N041615
MSDS Number: BSWFQ

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MWG0

Telephone: 716-265-0413

Cage: 0MWG0

ETHYLENE/MALEIC ANHYDRIDE COPOLYMER

CAS: 9006-26-2

Fraction By Weight: 100%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPORS AND FUMES MAY BE HARMFUL OR
IRRITATING.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MED ASSIST. INHAL:
REMOVE FROM EXPOSURE. IF BREATHING STOPS, BEGIN MOUTH TO MOUTH.
EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH AFFECTED
AREA W ITH SOAP & WATER. REMOVE DIRTY CLOTHING. INGEST: CALL MD
IMMEDIATELY.

Extinguishing Media:CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.

Spill Release Procedures:SWEEP UP & DISCARD. USE APPROPRIATE SAFETY
EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN DRY PLACE. KEEP CONTAINERS
CLOSED TO PREVENT CONTAM. OPEN CONTAINERS ONLY IN WELL-VENTILATED
AREA.
Other Precautions:MATERIAL IS INTENDED FOR LAB USE ONLY. IT IS NOT SOLD
OR INTENDED FOR DRUG, HOUSEHOLD OR OTHER USES.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:EYEBATH &/SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Solubility in Water:SOLUBLE.
Appearance and Odor:ODORLESS, TASTELESS, FREE-FLOWING WHITE POWDER.

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:IN ACCORDANCE WITH FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.